# PSPBoot predefined environment variables
# ----------------------------------------
#
# This file is to be used by the Router Repair Tool by Neo
# ~ Routertech.Org
#
# PSPBoot environment files contain some predefined variable names.
# Many of these variables are optional depending on the router model
# and hardware.
#
# If you wish to successfully extract all the variables from a PSPBoot
# mtd3 file, you must correctly define the variables that apply in this
# file.
#
# The hash key "#" should be used to comment out any variables that do
# not apply to your router.
#
# If you do not understand what the contents of this file represents then
# you will have to accept that you will not be able to extract environment
# variables from PSPBoot mtd3 files! Alternatively, you might be lucky and
# find a copy of this file that has already been configured for your router.

# Required
CPUFREQ
MEMSZ
FLASHSZ
MODETTY0
MODETTY1
PROMPT
BOOTCFG
HWA_0

# Optional
# if !defined(AVALANCHE)||defined(TNETC401B) then uncomment following 1 line
HWA_1

# Optional
# if !defined(TNETV1020_BOARD) then uncomment following 1 line
HWA_RNDIS

# Optional
# if defined(TNETD73XX_BOARD) then uncomment following 1 line
HWA_3

# Required
IPA
IPA_SVR
IPA_GATEWAY
SUBNET_MASK
BLINE_MAC0

# Optional
# if !defined(AVALANCHE)||defined(TNETC401B) then uncomment following 1 line
BLINE_MAC1

# Optional
# if !defined(TNETV1020_BOARD) then uncomment following 1 line
BLINE_RNDIS

# Optional
# if defined(TNETD73XX_BOARD) then uncomment following 1 line
BLINE_ATM

# Optional
# if !defined(TNETV1020_BOARD) then uncomment following 3 lines
USB_PID
USB_VID
USB_EPPOLLI

# Optional
# if defined(TNETV1050_BOARD) then uncomment following 1 line
#BLINE_ESWITCH

# Optional
# if !defined(TNETV1020_BOARD) then uncomment following 2 lines
USB_SERIAL
HWA_HRNDIS

# Required
REMOTE_USER
REMOTE_PASS
REMOTE_DIR
SYSFREQ
LINK_TIMEOUT

# Optional
# ifndef AVALANCHE /*Avalanche boards use only one macport*/ then uncomment following 1 line
MAC_PORT

# Required
PATH
HOSTNAME

# Optional
# if defWLAN then uncomment following 5 lines
HW_REV_MAJOR
HW_REV_MINOR
HW_PATCH
SW_PATCH
SERIAL_NUMBER

# Required
TFTPCFG

# Optional
# if defined(TNETV1050_BOARD) then uncomment following 1 line
#HWA_ESWITCH